Minwax®
Tung Oil Finish is an oil-based protective finish that also gives wood
a hand-rubbed lustre. Minwax® Tung Oil Finish penetrates wood pores
and restores vitality to dry, thirsty wood. Minwax® Tung is easy
to maintain and can be applied over stained and unstained wood.
Directions
1.Sand
to obtain a smooth, uniform surface. Remove all dust with a cloth dampened
with mineral spirits.
2.Apply Minwax® Wood Finish™ Stain, if desired, following
the label directions.
3.Wipe or brush on a generous coat of Minwax® Tung Oil. Apply in
the direction of the grain.
4.After 5-10 minutes, buff evenly with a clean, lint-free cloth.
5.Wait 24 hours and apply a second coat. Two coats are recommended.
6.For additional gloss, repeat after 24 hours.
7.With Minwax® Tung Oil you control the brightness of the finish
because the surface gains more gloss with each coat you apply.
Cleanup: Use mineral spirits or paint thinner following manufacturer’s
safety instructions
Note:
Not recommended for floors
